Search results
Results from the WOW.Com Content Network
Prism compressors are typically used to compensate for dispersion inside Ti:sapphire modelocked lasers. Each time the laser pulse inside travels through the optical components inside the laser cavity, it becomes stretched. A prism compressor inside the cavity can be designed such that it exactly compensates this intra-cavity dispersion.
The term "sphere" comes from the geometry of lenses. Lenses derive their power from curved surfaces. A spherical lens has the same curvature in every direction perpendicular to the optical axis. Spherical lenses are adequate correction when a person has no astigmatism. To correct for astigmatism, the "cylinder" and "axis" components specify how ...
Lenses of this type have been made from silicon, plastic, and lithium. To address the challenge with absorption in the lens, each prism in the saw-tooth lens can be exchanged for a column of smaller prisms, hence removing phase shifts of 2π that do not contribute to refraction but add absorption. [7]
The Petzval objective, or Petzval lens, is the first photographic portrait objective lens (with a 160 mm focal length) in the history of photography. [1] It was developed by the Slovak mathematics professor Joseph Petzval in 1840 in Vienna , [ 2 ] with technical advice provided by Peter Wilhelm Friedrich von Voigtländer [ de ] .
The lower prism uses one total internal reflection, followed by a second reflection on the bottom surface to direct the beam into the second Schmidt prism. This second reflection in the lower prism happens at less than the critical angle, therefore the Schmidt–Pechan prism requires a reflective coating for this surface to be usable in ...
Vertex distance is the distance between the back surface of a corrective lens, i.e. glasses (spectacles) or contact lenses, and the front of the cornea. Increasing or decreasing the vertex distance changes the optical properties of the system, by moving the focal point forward or backward, effectively changing the power of the lens relative to ...
In fluid dynamics, the Cunningham correction factor, or Cunningham slip correction factor (denoted C), is used to account for non-continuum effects when calculating the drag on small particles. The derivation of Stokes' law , which is used to calculate the drag force on small particles, assumes a no-slip condition which is no longer correct at ...
The aim of an accurate intraocular lens power calculation is to provide an intraocular lens (IOL) that fits the specific needs and desires of the individual patient. The development of better instrumentation for measuring the eye's axial length (AL) and the use of more precise mathematical formulas to perform the appropriate calculations have significantly improved the accuracy with which the ...