Search results
Results from the WOW.Com Content Network
For those pipes the pitch is a function of its length, the wavelength of the sound produced by an open pipe being approximately twice its length. A pipe half the length of another will sound one octave higher. If the longest pipe, C, is 8 feet (2.4 m) in length, the pipe one octave higher will be 4 feet (1.2 m) long, and two octaves above ...
Organ flue pipe scaling. Scaling is the ratio of an organ pipe 's diameter to its length. The scaling of a pipe is a major influence on its timbre. Reed pipes are scaled according to different formulas than for flue pipes. In general, the larger the diameter of a given pipe at a given pitch, the fuller and more fundamental the sound becomes.
Pipe organ tuning. This article describes the process and techniques involved in the tuning of a pipe organ. Electronic organs typically do not require tuning. A pipe organ produces sound via hundreds or thousands of organ pipes, each of which produces a single pitch and timbre. The goal of tuning a pipe organ is to adjust the pitch of each ...
The pitch produced by an organ pipe is a function of its length. All else equal, longer pipes produce lower-pitched notes, and shorter pipes are higher in pitch. An organ stop uses a set (rank) of pipes of graduated lengths to produce the range of notes needed. Stops with pipes tuned to sound the pitch normally associated with the keys (i.e ...
The pipe organ is a musical instrument that produces sound by driving pressurised air (called wind) through the organ pipes selected from a keyboard.Because each pipe produces a single pitch, the pipes are provided in sets called ranks, each of which has a common timbre, volume, and construction throughout the keyboard compass.
The length of the foot does not affect the pipe's pitch, so organ builders vary the foot lengths of their flue pipes depending on other factors, including the desired shape of the pipes in the façade, the height of the rackboard in which the pipes are seated, and the weight of the completed pipe.
The particular length "eight feet" is based on the approximate length of an organ pipe sounding the pitch two octaves below middle C, the bottom note on an organ keyboard. [1] This may be calculated as follows. If a pipe is open at both ends, as is true of most organ pipes, its fundamental frequency f can be calculated (approximately) as follows:
The pitch produced by a pipe is a function of its length. An organ stop may be tuned to sound (or "speak at") the pitch normally associated with the key that is pressed (the "unison pitch"), or it may speak at a fixed interval above or below this pitch (an "octave pitch").